Big Box for Remote Controls and WhatNot

I needed a Big Box. I have a Mendel (roughly) that I made myself. This box two parts ... one is 190mm x 190mm x 75mm and the other is 190mm x 190mm x 25mm. It's about as big as my printer can print.

I weighs in at a little over 1/2 kg of material on my slicer/printer/etc. This is part of my design spec: I wanted something that the dog would leave alone ... so heavy is good. I cut some designs into the sides and a repeating pattern on the top/bottom. Partly for interest and partly to save a bit on plastic.

There should be 2mm of play for the box top against the lip of the bottom. It's designed so that you have to lift off the top --- that it won't just slide off... but it's not tight.

I have an nVidia Shield with controllers and a controller for my Steam box... so I needed a "Big" Box.

I designed all the cutouts such that no support would be required...