Thingiverse
Dillon locator pin lifter tab (in several diameters)
by stijnpeeters
109
Downloads
57
Likes
0
Makes
This is a printable replacement for the Dillon ammo press locator pin.
Makes it ieasy to lift the locator pin from the press.
the pin being diameter 3,4 mm (R1,7) the ideal hole diameter would be R1,7
but most 3d printers are bleeding a bit in width so with my Anet A8 the hole at R1,95 was an ideal fit for the Dillon pin printed in PLA.
So please select the ideal size ( i made them from R1.7 to 2.0) based upon your printer and material (as other materials may shrink of behave different.)
Makes it ieasy to lift the locator pin from the press.
the pin being diameter 3,4 mm (R1,7) the ideal hole diameter would be R1,7
but most 3d printers are bleeding a bit in width so with my Anet A8 the hole at R1,95 was an ideal fit for the Dillon pin printed in PLA.
So please select the ideal size ( i made them from R1.7 to 2.0) based upon your printer and material (as other materials may shrink of behave different.)
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in