Tricopter FPV drone - Ufezela

Ufezela (Scorpion in Zulu) is a 3D printed tricopter frame. Suitable for 5inch propellers in the front and 6-inch in the back. 3S/4S LiPo has a place for "standard" FPV camera and 36x36mm flight controller and PDB (30.5mm hole spacing).

I suggest printing arms with ABS or PET-G with thick walls (1.6 or 2.0mm) and at least 40% infill. It is heavier, but should not break that easily

[Youtube video](https://www.youtube.com/watch?v=lbJ9wtbZQRU)

Parts for the frame:
8x M3x45mm bolts
or
4