3U to 1U Erorack adapters for m2.5 screw systems

these are Eurorack adapters to adapt your 3U sized modules to 1U Eurorack slots. these were designed for m2.5 screws. Most racks use m3 screws so I designed some to work with racks that use m2.5 screws. The screws thread into the plastic itself and don't need a nut on the back. Designed with Fusion 360. Print in PLA 195/60*, 60mm/s
Pretty simple. Print two. Left side is normal, right one.. flip it over.

See our Eurorack 3D Printing Facebook group!
https://www.facebook.com/groups/96868697