Light lamp lamba avize licht

1. Print 1.stl
2. Cut the carbon fiber (add some margin)
3. Strecth it and cover the face (I used hot air gun)
4. Repeat this process 4 times
5. Glue them together with transparent epoxy
6. Buy a 300x300 white light emited plexgilas
7. Cut the plexiglas (I used ~12cm nickel cabel and 12v adapter)
8. Make sure no light escape from carbon fiber (I used painter tape)
9. Print 2.stl (ABS or HTPLA)
10. Buy LED filament lamp (make sure not getting hot)

[2.stl required 300x300 printer or yo