Thingiverse
Hypercube Evolution Kraken mount with 4 berd air
by PW-Sys
15
Downloads
9
Likes
0
Makes
Hi,
this is not tested yet...
4 berd airs are needed. It's intended for the self made version with 3mm aluminium tube (ID 2.4mm) bend with [2869014 ](https://www.thingiverse.com/thing:2869014) . All 3mm tube radii are bent with the same tool.
The big tube is a 8x7.1mm
The kraken is a chines clone (with 2.85mm support). The e3d heater-blocks are the original ones.
If printed use at least 4 perimeters and 4 top/bottom layers (The air is routed through the holder)
Updates:
- 2018-1
this is not tested yet...
4 berd airs are needed. It's intended for the self made version with 3mm aluminium tube (ID 2.4mm) bend with [2869014 ](https://www.thingiverse.com/thing:2869014) . All 3mm tube radii are bent with the same tool.
The big tube is a 8x7.1mm
The kraken is a chines clone (with 2.85mm support). The e3d heater-blocks are the original ones.
If printed use at least 4 perimeters and 4 top/bottom layers (The air is routed through the holder)
Updates:
- 2018-1
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in