Thingiverse
Raise3D N2 - Quad Fan Upgrade
14
Downloads
15
Likes
0
Makes
**SUPERSEDED: https://www.thingiverse.com/thing:3440161
As you may notice there should be two free fan plugs on Raise3D N2 printers which can be used for the additional two fans. May require some gapping for the limit switch but I will update where necessary.
Print:
- 1no. Quad Fan Air Duct
- 4no. Fan Cover
Additionally Requires:
- 2no. 35mm Axial Fans
- 6no. M3 x 10mm Socket Head Screws (Duct to Extruder Housing)
- 8no. M3 x 20mm Socket Head Screws (Through Fan & Cover)
As you may notice there should be two free fan plugs on Raise3D N2 printers which can be used for the additional two fans. May require some gapping for the limit switch but I will update where necessary.
Print:
- 1no. Quad Fan Air Duct
- 4no. Fan Cover
Additionally Requires:
- 2no. 35mm Axial Fans
- 6no. M3 x 10mm Socket Head Screws (Duct to Extruder Housing)
- 8no. M3 x 20mm Socket Head Screws (Through Fan & Cover)
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in