Thingiverse
Customizable Camera Arm (Female ends)
by Scnd_edition
35
Downloads
22
Likes
0
Makes
Main post is located at https://www.thingiverse.com/thing:3317860
This is a customizable camera mount arm that can support M3 through M6 sized screws, can be sized in length from 31mm+ and adjustments can be made to improve fix and motion of arms.
The default settings are for M3 screws. Everything fits well, but note that the nut capture is intentionally very tight so that tightening the screw will pull the nut in to the slot. Adjust the allowances if you have difficulty getting the nut to
This is a customizable camera mount arm that can support M3 through M6 sized screws, can be sized in length from 31mm+ and adjustments can be made to improve fix and motion of arms.
The default settings are for M3 screws. Everything fits well, but note that the nut capture is intentionally very tight so that tightening the screw will pull the nut in to the slot. Adjust the allowances if you have difficulty getting the nut to
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in