Customizable Camera Arm (rotating - 1 of 2)

Main post is located at https://www.thingiverse.com/thing:3317860

This is part 1 of 2 to make a 360* rotating camera mount arm.

This is a customizable camera mount arm that can support M3 through M6 sized screws, can be sized in length from 31mm+ and adjustments can be made to improve fix and motion of arms.

The default settings are for M3 screws. Everything fits well, but note that the nut capture is intentionally very tight so that tightening the screw will pull the nut in to the slot