case - stereoMicroscope50mmAuxiliaryObjectives 001

- Cases for the X0.5 and X2 auxiliary objectives used with stereo microscopes.

- Very snug fit on the lens bodies. If your printer isn't printing good straight verticals, or if your external perimeter toolpaths are not *specifically* set to 0.4mm wide in your slicer..then this may be too tight. Air suction actually prevents the lens from coming out until you encourage it to. This is intentional.

- Works for me:
PLA, 0.4mm nozzle, 0.2mm layers, 1.2mm wall/top/bottom thickness, no supports