Arrow shaft airplane

Parts for an RC airplane with a carbon arrow shaft as the body. The arrow I used is from a bi-mart 3 pack and has a diameter of 7.5mm. I used and emax rs2205 with a 6" propellor, little bee 30A ESC, and a 1300mah 4s lipo. The wing is about 30" wide and made from DTFB and instructions from: https://bit.ly/2sfmlhL

I used some tg9e servos from hobby king and hot glue, super glue, tape, and zip ties. Oh I did end up buying a roll of servo wire to extend the wires from the tail forward. The tail