Thingiverse
Tevo Tornado Mini IR Sensor Mount
by peterke
2
Downloads
1
Likes
0
Makes
Credit goes to @jneilliii . My design is based on his thing:2502410 .
Position of screw hole is not the same on Tevo Tornado as on the original's Creality CR-10 design.
I also made it thinner. The plate on the side is only for support during the print process. You can remove it. For me it didn't even print.
You will need to change the screw from the original M3x6 to M3x8.
If you set the physical distance to 1.5 mm as described in this article:
https://miscsolutions.wordpress.com/mini-heig
Position of screw hole is not the same on Tevo Tornado as on the original's Creality CR-10 design.
I also made it thinner. The plate on the side is only for support during the print process. You can remove it. For me it didn't even print.
You will need to change the screw from the original M3x6 to M3x8.
If you set the physical distance to 1.5 mm as described in this article:
https://miscsolutions.wordpress.com/mini-heig
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in