dual spool adapter for 2" and 2-1/2" spool cores

After looking at all of the spindle to reel adapters on here I decided to try my hand at making one specific to my needs. Most were only one size or were for the wrong size. so I made these with a 2" and a 2-1/2" diameter section. they fit quite nicely in the spools I have. I didn't use any support as it lays flat on the bed. I didn't use any raft as you can probably tell from the pictures. I did use a glass bed and used glue stick for adhesion. they printed in about 15 to 20 min.