Adapter Ring for Makita Trimmer - X-Carve Dust Shoe

This is an adapter ring to mount the dust shoe by FablabMoebius to the makita trimmer
directly.

THIS IS ONLY THE ADAPTER RING (shown in green in the picture) you will need to download the original thing as well.

It needs 2x M3 threaded inserts and 3x M3 16mm bolts to mount to the trimmer,
I used 5min epoxy to glue the ring inside the existing dust shoe.

I also used some 1.5mm thick clear plastic sheet for the brushes. I made a long strip and screwed it in the channel for brushes,