Thingiverse
CNC Dust Boot Bosch Colt Router
by crandell2
26
Downloads
21
Likes
0
Makes
A compact dust collector boot that fits the popular Bosch Colt router with 89mm body.
A standard (small - 1 1/4 inch) shopvac hose fits the outlet.
Groove around the bottom perimeter (5 x 15mm) accommodates the brush strip.
(I had anticipated needing to hot-glue the brush into the groove, however since it gets inserted a full 15mm, no adhesive was needed.)
One bolt for the clamp knob is needed (1/4-20 x 1 1/4 L).
The brush strip is available on ebay... https://ebay.us/jD73Dx.
M
A standard (small - 1 1/4 inch) shopvac hose fits the outlet.
Groove around the bottom perimeter (5 x 15mm) accommodates the brush strip.
(I had anticipated needing to hot-glue the brush into the groove, however since it gets inserted a full 15mm, no adhesive was needed.)
One bolt for the clamp knob is needed (1/4-20 x 1 1/4 L).
The brush strip is available on ebay... https://ebay.us/jD73Dx.
M
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in