Thingiverse
Martian II Quadrocopter Motor Led holder
by Death
4
Downloads
2
Likes
0
Makes
Adapted prop guard to fit a 60 LED/m WS2812B led strip (6 leds per arm) + one single ws2812b led at the bottom.
I used a Arduino pro mini, connecting the leds of each arm to a separate pin. If you want to use betaflight you need to connect all LEDs to one pin on the FC. Therefore, you may not be able to use the bottom leds (or have weird wiring).
Video where you can see the LEDs at the start (and sometime during the video): https://www.youtube.com/watch?v=L4ryFPPc-dk
I used a Arduino pro mini, connecting the leds of each arm to a separate pin. If you want to use betaflight you need to connect all LEDs to one pin on the FC. Therefore, you may not be able to use the bottom leds (or have weird wiring).
Video where you can see the LEDs at the start (and sometime during the video): https://www.youtube.com/watch?v=L4ryFPPc-dk
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in