Thingiverse
Gold Sluice box
by Goyd
72
Downloads
47
Likes
1
Makes
29.01.2019 UPDATE:
I have add the screw and the nut, but it closes and opens in the opposit direction then normal screws. I have printed version2 of the underground / base frame. Settings 0.3mm with support, infill must be at least 15% the higher the better. The screw and nut must be printed with 0.1 and 100% infill.
On my print i have noticed that the sidewalls becomes relativly thin at the upper side. I will change this a bit.
28.01.2019 UPDATE:
Please print Version 2 (Gold Sluice box m
I have add the screw and the nut, but it closes and opens in the opposit direction then normal screws. I have printed version2 of the underground / base frame. Settings 0.3mm with support, infill must be at least 15% the higher the better. The screw and nut must be printed with 0.1 and 100% infill.
On my print i have noticed that the sidewalls becomes relativly thin at the upper side. I will change this a bit.
28.01.2019 UPDATE:
Please print Version 2 (Gold Sluice box m
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in