Thingiverse
Flexahedron Rehinged
by jmsaltzman
16
Downloads
13
Likes
1
Makes
Remix smaller (40mm/side) with screw-secured hinges instead of snap-fit hinges.
To make, you will need 12 of each part (prism and hinge) and 24 screws, M2 x 20mm. I used 20 hex cap screws (all I had) plus four slotted head screws.
In the photos, you can see the lengths of filament I used as hinges before I found the slotted head screws: you could just jam filament in there and cut it off.
Onshape model for copying, editing, whatever you like:
https://cad.onshape.com/documents/85a9e7fc2
To make, you will need 12 of each part (prism and hinge) and 24 screws, M2 x 20mm. I used 20 hex cap screws (all I had) plus four slotted head screws.
In the photos, you can see the lengths of filament I used as hinges before I found the slotted head screws: you could just jam filament in there and cut it off.
Onshape model for copying, editing, whatever you like:
https://cad.onshape.com/documents/85a9e7fc2
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in