Thingiverse
CR-10 Complete Cable Chain
by junaling
332
Downloads
203
Likes
0
Makes
IMPORTANT : 2019-07-22
While running the printer constantly with nozzle at 230C, it slowly heats up the terminal block on the hotend heater connection, don't connect your heater through the terminal block use JST connectors instead with higher power rating.
All axis cable chain mod for CR-10
Get chains here: https://www.thingiverse.com/thing:3377296
Use ABS or PETG, PLA will work but may easily deform especially when enclosed
10 pin terminal block : https://www.pololu.com/product/24
While running the printer constantly with nozzle at 230C, it slowly heats up the terminal block on the hotend heater connection, don't connect your heater through the terminal block use JST connectors instead with higher power rating.
All axis cable chain mod for CR-10
Get chains here: https://www.thingiverse.com/thing:3377296
Use ABS or PETG, PLA will work but may easily deform especially when enclosed
10 pin terminal block : https://www.pololu.com/product/24
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in