Laser Cut DRAWS Encloser - WB7FHC

I have modified my original UDRC case for the new DRAWS board from NW Digital Radio. DRAWS is a HAT that goes onto an Rpi to create the "Digital Radio Amateur Work Station" for Packet Radio, APRS, Fldigi and other Amateur Digital Radio modes.

This file will cut three cases on a single 12" x 12" sheet of 1/8 inch acrylic.

The case assembles tightly with no screws or glue.

1. Put the bottom and two long sides together first and drop in the electronics. The top long shoulders go on the US