Motion Simulator prototype 6dof Stewart Platform

This is a work in progress!
Take the 3d printed parts, some servos and electronics and build a fully working 6 degrees of freedom motion platform.

You will need to print:
6 x armendv2.stl
1 x base.stl
1 x basecap.stl
6 x armbearing.stl
6 x armspline.stl
1 x platform.stl
1 x bottom.stl
6 x servolid.stl (these may or may not work with your servos!)

You will need the following parts:
6 x hobby servos (part number MG996R)
1 x Arduino nano (Elegoo)
1 x Power Supply (12V 10A recommen