DeltaStar - Power supply enclosure

This is my enclosure for the Power supply
It fits on a 360 Watts power supply with a size of 112 x 52 x (any length my has 210) mm.
There is a hole for a standard switch and power plug.
I printed it in ABS clear with honeycomb infill.
There are NO mountings for the illumination LEDs, just soldered 3 and a 120 Ohm resistor to a stripe and plugged them to the 12V line.
Be careful with the mains voltage its very dangerous I guarantee for nothing.
fits with
http://www.thingivers