Thingiverse
Monoprice MP i3 Mini / Wanhao i3 Mini Spool Holder Mod
by Firehawk2k2
5
Downloads
2
Likes
0
Makes
Mounts should be printed with 3+ walls and solid or with high infill.
Arms were sourced from thing# 2898869 and modified. Should be printed with 3+ walls and at least 20%+ infill.
I don't have a good bar that can go between the arms, i just used a piece of stainless pipe i had.
The hole is for an M3x16 screw. A nut will not fit on the back, i may add a nut holder in the future. As of now it's holding great with just a slightly undersized hole.
Arms were sourced from thing# 2898869 and modified. Should be printed with 3+ walls and at least 20%+ infill.
I don't have a good bar that can go between the arms, i just used a piece of stainless pipe i had.
The hole is for an M3x16 screw. A nut will not fit on the back, i may add a nut holder in the future. As of now it's holding great with just a slightly undersized hole.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in