Slingshot HGX-Frame V1a

My Design for a 3D print slingshot,
Print it twice with one part mirrored. Glue it together and insert 4 M3x16 screws.

Designed for low weight ammo and light tube rubber bands.
Use at least 4 perimeters and 40% infill.

With my very light tubes and 6mm 0.25g (BBs) I get 50m/s which results in less than 0.5J. So this can be considered as safe if you wear light protection, but strong enough to have fun shooting at a 5m paper target
Estimated bullet drops:
2cm@3m
5cm@5m
20cm@10m