Thingiverse
Dial indicator holder for Emco C8
by namokkik
39
Downloads
28
Likes
1
Makes
This is a Z dial indicator holder that fits an Emco C8, might also work for the 9x18 or 9x20 and Optimum lathes.
Sorry, no pictures in action since I sold my lathe.
Clamping is done with a 30mm M6 screw.
The bottom clamping plate needs to be tapped in M6x1.
I have included it but it makes more sense to use a strip of a suitable material (I used 5mm phenolic board) and drill and tap it.
The 8mm hole for the dial indicator stem may need reaming, depending on your printer.
If the DI end
Sorry, no pictures in action since I sold my lathe.
Clamping is done with a 30mm M6 screw.
The bottom clamping plate needs to be tapped in M6x1.
I have included it but it makes more sense to use a strip of a suitable material (I used 5mm phenolic board) and drill and tap it.
The 8mm hole for the dial indicator stem may need reaming, depending on your printer.
If the DI end
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in