Tolerance check for M4 nut and embossing M4 bolt

Smallest outside measurement for the nut goes from 7mm to 7,5mm in steps of 0,1 mm.
Diameter for thread goes from 3,85mm to 4,45mm in steps of 0,1mm.
Diameter for embossing goes from 7,4mm to 8mm in steps of 0,1mm.

I found for the replicator 2X that
- 7,5 works best for the nut.
- 4,45 is still not enough for thread
- 8 is good for embossing but deeper is still possible