Omzlo PiMaster Case for Raspberry Pi model B boards

This is a 2 part case for a Raspberry Pi with an Omzlo PiMaster HAT attached on top. It is designed to use the standoffs and screws included with the PiMaster and 4 screws M2.5x8 countersunk. 2 screw to the standoffs from the bottom on the 40 pin side and 2 screw from the top to the case to hold the cover in place (the top screws will form the threads on the printed case). No supports needed, just make sure your print settings result in clean bridging for the ports. I printed the cover in a tran