Thingiverse
SR-25 HPA Stock
by snakebitey
13
Downloads
9
Likes
0
Makes
An air stock for A&K SR-25 (non-K).
It takes a G&P 8.5ci tank and Polarstar MR reg.
Requires an 80mm M5 bolt and 20mm M5 penny washer to attach stock to the gearbox. You will need an M5 threaded nut of some kind on the inside of the gearbox, which might be the original spring guide if it'll fit. I just machined a small bit of aluminium to fit and tapped threads into it.
License means you can download and print this for yourself and others, but NOT sell it or change it.
It takes a G&P 8.5ci tank and Polarstar MR reg.
Requires an 80mm M5 bolt and 20mm M5 penny washer to attach stock to the gearbox. You will need an M5 threaded nut of some kind on the inside of the gearbox, which might be the original spring guide if it'll fit. I just machined a small bit of aluminium to fit and tapped threads into it.
License means you can download and print this for yourself and others, but NOT sell it or change it.
Makes
Did you print this model? Sign in and share your make!
![[Airsoft] Amplifier CW/CCW Threading](https://wsrv.nl/?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2Fca%2F30%2F79%2F5e%2F46%2Fdb76f759606646b508ca4bd19dab5c37_display_large.jpg&w=400&h=300&fit=cover&output=webp&q=80)
Sign in to leave a comment
Sign in