Thingiverse
Creality Direct Drive: Stock Extruder & Hotend
by Hangtight
275
Downloads
195
Likes
5
Makes
Beta of a direct drive using the Stock Creality extruder, stepper and hotend.
One of the roller bolts will need to be replaced with a standard M5 socket head bolt. The shroud fits over this to give a secure mounting.
The stepper bracket is secured to the shroud with M3 socket head screws which are secured into M3 nuts fitted into the provided slots. The 5015 blower is secured to the duct in a similar way, as is the duct secured to the shroud.
The Extruder location plate fits into the 22
One of the roller bolts will need to be replaced with a standard M5 socket head bolt. The shroud fits over this to give a secure mounting.
The stepper bracket is secured to the shroud with M3 socket head screws which are secured into M3 nuts fitted into the provided slots. The 5015 blower is secured to the duct in a similar way, as is the duct secured to the shroud.
The Extruder location plate fits into the 22
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in