Thingiverse
Chticat Duct
by BoTa
7
Downloads
2
Likes
0
Makes
This is a duct for the ChtiCat Racer.
Suitable for propeller sizes up to 7 inches.
The duct can be adjusted to the Chticat by the machine screw adapter. For this purpose, an M6 thread must be cut in the holes provided in the duct.
This optimizes the contact pressure on the ground considerably.
With a 7x5 propeller and a 3S 2700 engine this is a racer on steroids.
Please print everything with 100% infill.
The Duckt must be turned 180° degrees. Sorry for that.
Many thanks to chtipanda who d
Suitable for propeller sizes up to 7 inches.
The duct can be adjusted to the Chticat by the machine screw adapter. For this purpose, an M6 thread must be cut in the holes provided in the duct.
This optimizes the contact pressure on the ground considerably.
With a 7x5 propeller and a 3S 2700 engine this is a racer on steroids.
Please print everything with 100% infill.
The Duckt must be turned 180° degrees. Sorry for that.
Many thanks to chtipanda who d
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in