2in1 & 4in1 Splitter

This is a 2in1 and 4in1 Splitter for PC4-M6 push through fittings. There are two versions of each splitter. One with a M10 threat on the outside to screw into the hotend and the other one with a M6 thread on the inside for another PC4-M6 push through fitting. The filament path inside the splitter is a bit wider than a normal PTFE tube to prevent clogging inside the splitter (2in1 2.3mm/ 4in1 2.5mm). I also added a Nema 17 mount for 2020 extrusion (M5x12mm, M5 T-nut, M3x12mm, M3 hexnut needed).