Thingiverse
Cylinder Puzzle
by ScubaSteveZ
28
Downloads
21
Likes
1
Makes
I did not design this puzzle. Wil Strijbos is the original designer.
V2 has tighter tolerances and I added visual marks for locating.
Make sure that the parts fit and rotate smoothly. Also that the balls go through the hole easily in the Top Cyl. You might have to do some filing/sanding.
You will need:
5 pc. 5/16 (0.313") ball bearings (Try the puzzle with two to start)
1 spring https://www.mcmaster.com/9657k335 (I cut a spring down that I had on hand)
(The O.D. of the spring nee
V2 has tighter tolerances and I added visual marks for locating.
Make sure that the parts fit and rotate smoothly. Also that the balls go through the hole easily in the Top Cyl. You might have to do some filing/sanding.
You will need:
5 pc. 5/16 (0.313") ball bearings (Try the puzzle with two to start)
1 spring https://www.mcmaster.com/9657k335 (I cut a spring down that I had on hand)
(The O.D. of the spring nee
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in