Raspberry 3 UMPC 4"

My first attempt to make Raspberry Pi UMPC. I designed the case as small as possible, but screwed with M3 screws to be reliably held together. Project also contains stylish cover to protect the touchscreen when not used.

Parts needed:

* Raspberry 3B / 3B+
* Waveshare LCD 4" GPIO
* Printed case
* 4 x M3x30 screws + 4x nuts to screw the case together
* 4x M2.5x5 screws to screw Raspberry in place

Print all parts on their most flat surfaces. Use supports, there are a few needed only an