Thingiverse
Creality CR-10S pro Filament guide & spool adapter
by Schnellbot
20
Downloads
14
Likes
0
Makes
Just slide it on the aluminum bracket & underneath the filament sensor.
This will anchor the guide really well, won't be any need for glue.
intentionally added some lengt on both the higher and lower half of the guide, this should give you the option to add bearings(or a small guide wheel) underneath the filament.
Should also be fairly easy to add a filament sponge/oiler on the top.
You'll need the following:
1pcs M3x30mm(ish)screw
2pcs 7x3x3mm bearings
4pcs M3 Nut/Locknut
NOTE:
This will anchor the guide really well, won't be any need for glue.
intentionally added some lengt on both the higher and lower half of the guide, this should give you the option to add bearings(or a small guide wheel) underneath the filament.
Should also be fairly easy to add a filament sponge/oiler on the top.
You'll need the following:
1pcs M3x30mm(ish)screw
2pcs 7x3x3mm bearings
4pcs M3 Nut/Locknut
NOTE:
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in