Paramotor for 2.4m HK parafoil

I've designed this paramotor after buying the HK parapent wing 2.4m
(https://hobbyking.com/nl_nl/2-4m-paraglider-sail-blue-turquoise-white.html)

I've printed the model with 1.75mm PLA at 220 degrees C and bed temp of 60.
Infill at 20%, 3 top and bottom layers, layer height of 0.20 in Cura.
Make sure you only touching buildplate only and 10%, otherwise you will have a lot of fun getting rid of the supports.

The leveler doesn't have holes, this because of the CoG that has to be determined