Thingiverse
Buffer stop for Hornby 00 tracks
by Dwiea
78
Downloads
41
Likes
0
Makes
Remix of 'Buffer stop for piko H0 tracks by alana_chan'.
You will need to remove the crimped fishplate on the rail before fitting. I added a guide tab which slots into the slot between the second and third sleepers and added some blocks either side of the rail for aesthetic reasons. I also added a support block and screw hole at the rear of the buffer stop so it can be screwed onto the layout board.
Just print 'Buffer stop for Hornby 00 tracks.stl' if you just want to make one. I printed a
You will need to remove the crimped fishplate on the rail before fitting. I added a guide tab which slots into the slot between the second and third sleepers and added some blocks either side of the rail for aesthetic reasons. I also added a support block and screw hole at the rear of the buffer stop so it can be screwed onto the layout board.
Just print 'Buffer stop for Hornby 00 tracks.stl' if you just want to make one. I printed a
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in