Thingiverse
Nema 17 Motor Cycloidal 5:1 Gear Ratio
by ricktress
22
Downloads
10
Likes
0
Makes
Nema 17 Motor Cycloidal 5:1 Gear Ratio
9mm thick when put together, requires 5x M3 bolts 15+mm and 1x M3 nut.
Print on 100% infill and ultra fine resolution (0.1mm or better ideally), supports on.
You will probably have to do some light sanding to ensure every surface is smooth and free of errors as there is only 0.2mm tolerance throughout. You may even want to add a few drops of oil to the inner mechanism if you intend it to have heavy use.
License: Creative Commons, Attribution, No
9mm thick when put together, requires 5x M3 bolts 15+mm and 1x M3 nut.
Print on 100% infill and ultra fine resolution (0.1mm or better ideally), supports on.
You will probably have to do some light sanding to ensure every surface is smooth and free of errors as there is only 0.2mm tolerance throughout. You may even want to add a few drops of oil to the inner mechanism if you intend it to have heavy use.
License: Creative Commons, Attribution, No
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in