35L Garbage Bin

This is a 35L Trash Can/Bin that is designed to fit in a Simplehuman under-cabinet pull-out frame. Originally, the pull-out frame came with two smaller trash bins (15L and 20L sizes). The two smaller trash bins proved not practical for me, so I wanted to replace it with a larger, single trash bin. This trash bin also works if you don't have a Simplehuman pull-out frame as any generic trash bin would.The trash bin was designed to be printed in a P1S or similar size. The model is split into 6 pieces. Two pieces each for the top, middle and bottom "layers". The two halves of the layers should be joined first prior to attaching the layers together. This is due to the orientation the of single-dovetail joint on each side of the layer-halves (refer to assembly guide). I used super glue to join the pieces after the print. Theoretically, though, it may not be required if the bowtie joints are snugly fitted. Supports are enabled in the print file with the interface material option p