Thingiverse
Emisar D18 Optic Ring
5
Downloads
4
Likes
2
Makes
This is a simple re-creation of the stock optic spacer ring in the Emisar D18 flashlight. It's not an upgrade in any way, just allows you to make it the color of your choosing.
The part is 0.84mm thick, the stock one is 0.80 as I measured. 7 layers at 0.12mm layer height works perfectly. Recommend printing with concentric infill. The space between holes is 0.60mm, so you may have to get creative with your outlines. I'm using a .30mm nozzle and I printed it at 105% flow.
Unscrew the b
The part is 0.84mm thick, the stock one is 0.80 as I measured. 7 layers at 0.12mm layer height works perfectly. Recommend printing with concentric infill. The space between holes is 0.60mm, so you may have to get creative with your outlines. I'm using a .30mm nozzle and I printed it at 105% flow.
Unscrew the b
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in