Sapphire S - GT2 leveling

If you want to replace the original X carriage bearings then here are a few parts to print.

If you bought Pulleys for the x-Carrier with 4 mm axes, then you need only the spacer.

! The pulleys on x axes have 4 mm.
! The pulleys in front of the x axes have no teeth.
! The pulleys behind the x axes have 16/20 teeth, what you want to use, i use 16 for more place.

! The reversing blocks at the back have 5 mm axes.

! You need longer screws, you can set the screws tight with loctite,
or