Anycubic I3 Mega pi wide-angle camera hotbed mount

Modified the original camera mount (1.stl) to accommodate a camera board with wide-angle lens (~16mm in diameter and placed in the center between the 4 screws)

Depending on the mounting of the camera/lens on the PCB, the back piece (2.stl) can't be used and the camera needs to be mounted using 2.2x6.5mm self-tapping screws (and possibly little spacers if not using the wideangle_led version).

If you don't want to add spacers in case your lens mount doesn't allow the camera to sit flush or i