Thingiverse
Stepper Mount for Fan and Heatsink
by joaocolchete
74
Downloads
67
Likes
0
Makes
Mount for a fan (40x40x10) and a heatsink (40x40x11) to be used in Nema17 stepper motors. Snaps well in place.
Preferable to use thermal paste between heatsink and stepper in order to achieve better heat transfer.
Use high-temp plastics such as PETG or ABS. The part will be in direct contact with the stepper, so PLA will soften easily. I used ABS. No Supports required.
Needed to hold the fan to the mount: 3mm Nuts(x4), M3x15mm Screws (x4)
Any question: feel free to comment down belo
Preferable to use thermal paste between heatsink and stepper in order to achieve better heat transfer.
Use high-temp plastics such as PETG or ABS. The part will be in direct contact with the stepper, so PLA will soften easily. I used ABS. No Supports required.
Needed to hold the fan to the mount: 3mm Nuts(x4), M3x15mm Screws (x4)
Any question: feel free to comment down belo
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in