Thingiverse
FT Bushwacker Landing Gear Brace
by Jeremyjo
6
Downloads
3
Likes
0
Makes
I made this so that I could securely attach some random aluminum landing gear I had to my Bushwacker.
This glues in front of and around the battery access hole in the bottom of the fuselage and can be glued to the sides as well. Probably has to be put in during construction but might fit through the battery hole after the fuse is built. The holes line up with the recommended position of the landing gear wire.
The holes are 2 7/16" apart and the nut holders are for 4mm nuts.
Slots are
This glues in front of and around the battery access hole in the bottom of the fuselage and can be glued to the sides as well. Probably has to be put in during construction but might fit through the battery hole after the fuse is built. The holes line up with the recommended position of the landing gear wire.
The holes are 2 7/16" apart and the nut holders are for 4mm nuts.
Slots are
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in