Thingiverse
KD310 Delta Arm
by ReprapRyn
10
Downloads
8
Likes
0
Makes
Did not find any good designs out there for magnetic effector arms using the KD310 magnetic joint system as found here.
https://www.aliexpress.com/item/32900515768.html?spm=a2g0s.9042311.0.0.680b4c4dVFXBEt
designed for 6mm thick Carbon Fiber arms, the KD310 series joint, and an m3x8 screw. use plenty of locktite to glue the screw into the magjoint and CA or E6000 to glue the carbon rod into the fitting. cut to size befor putting a second cap on (remember to measure with where the steel ball
https://www.aliexpress.com/item/32900515768.html?spm=a2g0s.9042311.0.0.680b4c4dVFXBEt
designed for 6mm thick Carbon Fiber arms, the KD310 series joint, and an m3x8 screw. use plenty of locktite to glue the screw into the magjoint and CA or E6000 to glue the carbon rod into the fitting. cut to size befor putting a second cap on (remember to measure with where the steel ball
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in