Thingiverse
S800 Rear LEDs - Matek WS2812S LED bars
by jjuk99
7
Downloads
2
Likes
0
Makes
A twin rear LED bar holder for the Matek WS2812S LED strips.
Designed for the S800 that is fitted with the motor mounting kit: http://tiny.cc/dsqo7y
Add a small piece of insulation tape UNDER the part where the solder joints will be on the carbon fibre plate (carbon fibre is conductive! this will stop it shorting out).
The LEDs should be at the top with the holes in the PCB at the bottom. This will ensure the LEDs are central across the back of the wing as long as the part is touching
Designed for the S800 that is fitted with the motor mounting kit: http://tiny.cc/dsqo7y
Add a small piece of insulation tape UNDER the part where the solder joints will be on the carbon fibre plate (carbon fibre is conductive! this will stop it shorting out).
The LEDs should be at the top with the holes in the PCB at the bottom. This will ensure the LEDs are central across the back of the wing as long as the part is touching
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in