Thingiverse
bowden extruder 3mm feat. adjustable tensioner and the PTFE-inserts
by T__K
6
Downloads
9
Likes
0
Makes
Just another remix for the original Creality mk8 extruder / feeder
reusing 3 of the original m3 bolts, the spring, as well as the bearing 11mm (+/-1mm) OD
need :
-some cheap tube push in fitting (1/4" -> picture above)
!!use a lighter to preheat the hole before srewing the push fitting into it!!
(or just use a 1/4" screw tap, if you have one XD)
-6mm OD bowden tube (4mm ID)
-M3x30 + M3x15/20 + 2x M3 nuts and some washers
-maybe some m6 drill
08.06.19....Also check out the 1.75mm
reusing 3 of the original m3 bolts, the spring, as well as the bearing 11mm (+/-1mm) OD
need :
-some cheap tube push in fitting (1/4" -> picture above)
!!use a lighter to preheat the hole before srewing the push fitting into it!!
(or just use a 1/4" screw tap, if you have one XD)
-6mm OD bowden tube (4mm ID)
-M3x30 + M3x15/20 + 2x M3 nuts and some washers
-maybe some m6 drill
08.06.19....Also check out the 1.75mm
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in