36V Bench PSU

This is my design for a 36V 5A max bench PSU. I did this project just because i wanted to try and think it turned out well.


This project was done just to see if I could do it as i'm just getting back into electronics and soldering. As the pictures show it went together well with pretty decent accuracy on the output. I have included the .stp file so people can alter it to suit their needs. There are 2 main parts(Base, Lid) with a third file with small 3mm spacers. I made the spacers as my screws were too long for the holes and did not want to print the base out again. If you find your screws are too long try using the spacers.

The parts i used are;

UCTRONICS Numerical Control (dsp5005)
https://www.amazon.com/gp/product/B01LWXAC5E/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

GDSTime 80x80x10mm radiator fan(12V)

https://www.amazon.com/gp/product/B00N1Y4SGY/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

URBEST IEC320 C14 inlet plug

https://www.amazon.com/gp