Thingiverse
can lid
by Rabuki
78
Downloads
59
Likes
0
Makes
I originally wanted to make a sign for the can but ended up with a lid instead.
Maybe I put the signs up later.
The lid is not quite 100% tight, but will keep insects and other foreign objects away from its contents.
I have tried to make it easily open able but in a way that it can be printed without support.
As seen in the picture and drawings, I have made an inclined surface which runs from the tab to the top edge of the lid, the system will then pull the top edge and grip on the in
Maybe I put the signs up later.
The lid is not quite 100% tight, but will keep insects and other foreign objects away from its contents.
I have tried to make it easily open able but in a way that it can be printed without support.
As seen in the picture and drawings, I have made an inclined surface which runs from the tab to the top edge of the lid, the system will then pull the top edge and grip on the in
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in