Dual pinion HSP diff single wheel pair axle

This axle uses 1x HSP 02024 DIFF and 2x 02030 pinion. If you want to lock the diff you may use Axial's AX30500 heavy duty locker.

You need 6x 6700 bearing and 4x MR105 bearing. To keep it together use 8x M3 bolts (10mm) and nuts.

Shaft to pinion must be metal, this axle will not work with the original 3d printed shafts. This is the only restriction, all else can be stock.

Housing with 2mm better ground clearance.

Note the mirrored housing to get correct wheel rotation, it is up to yo