K40 Laser Z Table
by Beevo
38
Downloads
15
Likes
0
Makes
My take on a motorized Z Table for the ubiquitous K40 chinese laser.
This one is a low profile design to take advantage of the confined space in the laser. Min/Max heights (as built) are 1.5" and 4" respectively. It is also easily removed, to allow the user to switch out to a rotary Z axis if desired.
Two 608ZZ skate board bearings (or similar) are pressed into each corner. A small arbor press or a drill press is needed to seat the bearings. The bottom end of the lead screw is tapped f
This one is a low profile design to take advantage of the confined space in the laser. Min/Max heights (as built) are 1.5" and 4" respectively. It is also easily removed, to allow the user to switch out to a rotary Z axis if desired.
Two 608ZZ skate board bearings (or similar) are pressed into each corner. A small arbor press or a drill press is needed to seat the bearings. The bottom end of the lead screw is tapped f
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in